The bladeRF x115 Thermal is functionally identical to the bladeRF x115. The units feature industrial temperate grade components that make them suitable for operating in thermally challenging environments between -40C and 85C.


Kit includes:

  • bladeRF x115 (115KLE Cyclone 4 FPGA)
  • USB 3.0 SS cable
  • 2x SMA cables


Out of the box, the bladeRF can tune from 300MHz to 3.8GHz without the need for extra boards. Through open source software such as GNURadio (live image), the bladeRF can be placed into immediate use. With its flexible hardware and software, the bladeRF can be configured to operate as a custom RF modem, a GSM and LTE picocell, a GPS receiver, an ATSC transmitter, or a combination Bluetooth/WiFi client, without the need for any expansion cards. All of the bladeRF host software, firmware, and HDL is open source, and available on GitHub.


Highlights:

  • Industrial temperature range from -40°C to 85°C
  • Full-duplex 40MSPS 12bit quadrature sampling
  • Factory calibrated VCTCXO tuned within 1 Hz of 38.4 MHz
  • Removable-cap RF shields for increased system sensitivity and isolation
  • Flexible clocking architecture for arbitrary sample rates
  • GPIO expansion port ( GPIO Expansion Board )
  • SPI flash allows for headless operation
  • Expanded frequency coverage using XB-200 Transverter Board
  • Typical +6dBm TX power

 

More Information:


USB 3.0 Superspeed


High speed, low latency and increased power delivery over a single cable: USB 3.0 Superspeed is the perfect interface for a wide bandwidth radio front end to modern computers. The Cypress FX3 microcontroller is the ideal solution with a powerful ARM9 processor and enough bandwidth to saturate the full duplex 5Gbps USB 3.0 link


Fully Programmable FPGA


An Altera Cyclone IV FPGA provides the interface between the FX3 and RF transceiver. This FPGA has single-cycle access embedded memory, hard 18x18 multipliers for dedicated DSP and many general logic elements ready to be programmed.


Wideband RF Transceiver


From bits to RF, the LimeMicro LMS6002D is a fully integrated RF transceiver. Made to power picocell stations, this transceiver is capable of handling anything from simple FM audio to the latest 4G LTE standard to whatever the future may hold.


Professional Quality


The bladeRF's design has been tested and verify to meet our very high standards. At peak RF performance, the bladeRF can occupy 28MHz of bandwidth over its operating bandwidth without any significant spurs.



Write a review

Please login or register to review

bladeRF x115 Thermal BRF-115-HT

  • Brand: Nuand
  • Product Code: Nuand-BladeRF-X115-Thermal
  • Reward Points: 1650
  • Availability: Shipped in 3 - 7 days
  • ₹164,999.00

  • Price in reward points: 164999

Related Products

HackRF One Software Defined Radio

HackRF One Software Defined Radio

HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission o..

₹27,499.00

bladeRF x115 BRF-115

bladeRF x115 BRF-115

The bladeRF x115 comes with a larger 115KLE Cyclone IV FPGA that provides additional room for hardwa..

₹74,899.00

bladeRF x40 BRF-40

bladeRF x40 BRF-40

The bladeRF x40 is a low-cost USB 3.0 Software Defined Radio. The 40KLE option makes the bladeRF the..

₹49,999.00

LimeSDR

LimeSDR

A Software Defined Radio for EveryoneLimeSDR is a low cost, open source, apps-enabled (more on that ..

₹32,499.00

LimeSDR Mini

LimeSDR Mini

The LimeSDR Mini development board is a hardware platform for developing and prototyping high-perfor..

₹18,499.00

Tags: bladeRF x115, Thermal (-40C to 85C), SDR