The MKR ZERO brings you the power of a Zero in the smaller format established by the MKR form factor. The MKR ZERO board acts as a great educational tool for learning about 32-bit application development. It has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware!  The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex® M0+ core.

Warning: Unlike most Arduino & Genuino boards, the MKRZero runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board.

The board contains everything needed to support the microcontroller; simply connect it to a computer with a micro-USB cable or power it by a LiPo battery. The battery voltage can also be monitored since a connection between the battery and the analog converter of the board exists. You can find here your board warranty informations. 

Getting Started

In the Getting Started section, you can find all the information you need to configure your board, use the Arduino Software (IDE), and start to tinker with coding and electronics. 

Need Help?

Tech Specs

  • Microcontroller : SAMD21 Cortex-M0+ 32bit low power ARM MCU
  • Board Power Supply (USB/VIN) : 5V
  • Supported Battery(*) : Li-Po single cell, 3.7V, 700mAh minimum
  • DC Current for 3.3V Pin : 600mA
  • DC Current for 5V Pin : 600mA
  • Circuit Operating Voltage : 3.3V
  • Digital I/O Pins : 22
  • PWM Pins : 12 (0, 1, 2, 3, 4, 5, 6, 7, 8, 10, A3 - or 18 -, A4 -or 19)
  • UART : 1
  • SPI : 1
  • I2C : 1
  • Analog Input Pins : 7 (ADC 8/10/12 bit)
  • Analog Output Pins : 1 (DAC 10 bit)
  • External Interrupts : 8 (0, 1, 4, 5, 6, 7, 8, A1 -or 16-, A2 - or 17)
  • DC Current per I/O Pin : 7 mA
  • Flash Memory : 256 KB
  • Flash Memory for Bootloader : 8 KB
  • SRAM : 32 KB
  • EEPROM : no
  • Clock Speed : 32.768 kHz (RTC), 48 MHz
  • LED_BUILTIN : 32 Full-Speed USB Device and embedded Host

OSH: Schematics 

The MKR ZERO is open-source hardware! You can build your own board using the following files: 


Write a review

Please login or register to review

Arduino MKR Zero | ABX00012

  • Brand: Arduino/ Genuino
  • Product Code: 128-Arduino-MKR-Zero
  • Reward Points: 22
  • Availability: Shipped in 3 - 7 days
  • ₹2,199.00

  • Price in reward points: 2199

Related Products

Power Supply 9V 1A

Power Supply 9V 1A

Power Supply 9V 1AFeaturesComes with DC Barrel outInput : 100-270V~0.8A 50-60 HzOutput : +9V, 1A MAX..

₹129.00

Arduino UNO Rev 3|A000066

Arduino UNO Rev 3|A000066

The UNO is the best board to get started with electronics and coding. If this is your first experien..

₹1,499.00

Arduino Starter Kit - Official K000007

Arduino Starter Kit - Official K000007

The Starter Kit is a great way to get started with Arduino, coding and electronics! The Starter Kit ..

₹7,499.00

Arduino Mega 2560 Rev3 | A000067

Arduino Mega 2560 Rev3 | A000067

The MEGA 2560 is designed for more complex projects. With 54 digital I/O pins, 16 analog inputs and ..

₹3,799.00

Arduino YÚN Rev 2 | ABX00020

Arduino YÚN Rev 2 | ABX00020

The Yún rev. 2 with the power of a Linux based system that enables advanced network connections and ..

₹5,299.00

Arduino MKR GSM 1400 | ABX00018

Arduino MKR GSM 1400 | ABX00018

The Arduino MKR GSM 1400 combines the functionality of the Zero and global GSM connectivity, making ..

₹5,899.00

Arduino MKR Vidor 4000 | ABX00022

Arduino MKR Vidor 4000 | ABX00022

Looking for a board for a very specific use that Arduino doesn’t make? Or maybe you want a more comp..

₹6,399.00

Arduino MKR WAN 1300 W/O Antenna | ABX00017

Arduino MKR WAN 1300 W/O Antenna | ABX00017

MKR WAN 1300 is a powerful board that combines the functionality of the MKR Zero and LoRa connectivi..

₹4,299.00

Arduino MKR IoT Bundle | GKX00006

Arduino MKR IoT Bundle | GKX00006

The MKR IoT Bundle is a great way to get started with the Internet of Things!The MKR IoT Bundle walk..

₹5,999.00

Tags: ARDUINO, MKR, ZERO, ABX00012