• LimeSDR Mini

The LimeSDR Mini development board is a hardware platform for developing and prototyping high-performance and logic-intensive digital and RF designs that use Altera’s MAX 10 FPGA and Lime Microsystems’ LMS7002M RF transceiver.

Render of the LimeSDR Mini

Top render of LimeSDR Mini

Bottom render of LimeSDR MIni

LimeSDR vs LimeSDR Mini

The LimeSDR and LimeSDR Mini are members of the same family of software-defined radios. One does not replace the other. Rather, they are complementary.

Simply put, the LimeSDR Mini is a smaller, less expensive version of the original LimeSDR. However, it still packs a punch - at its core, the LimeSDR Mini uses the same LMS7002M radio transceiver as its big sibling. The Mini has two channels instead of four, and, by popular demand, SMA connectors instead of micro U.FL connectors. Check out the comparison table below for more details.


Features & Specfications

  • RF transceiver: Lime Microsystems LMS7002M
  • FPGA: Altera MAX 10 (10M16SAU169C8G)
    • 169-pin FBGA package
    • 16 K Les
    • 549 KB M9K memory
    • 2,368 KB user flash memory
    • 4 x fractional phase locked loops (PLLs)
    • 45 x 18x18-bit multipliers
    • 130 x general purpose input/output (GPIO)
    • Single supply voltage
    • Flash feature
    • FPGA configuration via JTAG
  • EEPROM memory: 2 x 128 KB for RF transciever MCU firmware and data
  • Flash memory: 1 x 4 MB flash memory for data
  • General user inputs/outputs:
    • 2 x dual color (red + green) LED
    • 8 x FPGA GPIO pinheader (3.3 V)
  • Connectivity:
    • USB 3.0 Type-A (FTDI FT601 controller)
    • 2 x coaxial RF (SMA) connectors (each can be switched between high and low frequency bands)
    • U.FL connector for external clock source
    • FPGA GPIO headers
    • FPGA JTAG connector
  • Clock system:
    • 30.72 MHz onboard VCTCXO
    • Possibility to tune VCTCXO with onboard DAC
    • External clock input via U.FL connector
  • Board dimensions: 69 mm x 31.4 mm
  • Board weight: 20 grams

Block Diagram



Comparison Table



Free & Open Source

As with the original LimeSDR, the LimeSDR Mini is a free and open source project made in collaboration with the Myriad-RF project. We will be releasing code, firmware, schematics, layout, and associated project files shortly.


LimeSuite

The LimeSDR Mini uses the same host-side software, called LimeSuite, as the full-size LimeSDR. LimeSuite is entirely open source and supports a variety of software-defined radios. You can learn more about LimeSuite at its GitHub repository and Myriad-RF project page.


Snappy Ubuntu Core

A big part of the LimeSDR ecosystem is the Snappy Ubuntu Core app store being developed jointly with Canonical and the LimeSDR community. Because the LimeSDR and LimeSDR Mini use the same drivers and APIs, the snaps developed for one should work equally well for the other so long as they are within the operating specification.


Write a review

Please login or register to review

LimeSDR Mini

  • Brand: Lime Microsystems
  • Product Code: Lime-SDR-Mini
  • Reward Points: 185
  • Availability: Discontinued
  • ₹18,499.00

  • Price in reward points: 18499

Related Products

HackRF One Software Defined Radio

HackRF One Software Defined Radio

HackRF One from Great Scott Gadgets is a Software Defined Radio peripheral capable of transmission o..

₹27,499.00

bladeRF x115 BRF-115

bladeRF x115 BRF-115

The bladeRF x115 comes with a larger 115KLE Cyclone IV FPGA that provides additional room for hardwa..

₹74,899.00

bladeRF x40 BRF-40

bladeRF x40 BRF-40

The bladeRF x40 is a low-cost USB 3.0 Software Defined Radio. The 40KLE option makes the bladeRF the..

₹49,999.00

bladeRF x115 Thermal BRF-115-HT

bladeRF x115 Thermal BRF-115-HT

The bladeRF x115 Thermal is functionally identical to the bladeRF x115. The units feature industrial..

₹164,999.00

LimeSDR

LimeSDR

A Software Defined Radio for EveryoneLimeSDR is a low cost, open source, apps-enabled (more on that ..

₹32,499.00

Tags: LimeSDR Mini, Lime Microsystems